PYREX® 25mL Kuderna-Danish Insulated Tip Concentrator Tube without Hooks (Product #2157-25NT)
These 25mL PYREX® Kuderna-Danish concentrator tubes do not have spring hooks but instead use Keck clamps to attach to flasks. They have an inner 19/22 Standard Taper joint. The insulated tip Kuderna-Danish tubes have an air jacket around the tip. Due to th ...
PYREX® 1L Kuderna-Danish Concentrator Apparatus with Hooks (Product #2158-1L)
This complete 1L PYREX® Kuderna-Danish Concentrator apparatus consists of a 3-ball Snyder column with 24/40 Standard Taper joints (2158-3CO), a 1L flask with a 24/40 outer Standard Taper upper joint and 19/22 inner Standard Taper lower joint, and a 25mL gr ...
PYREX® Kuderna-Danish Concentrator Apparatus with Hooks (Product #2158-250)
This complete 250mL PYREX® Kuderna-Danish Concentrator apparatus consists of a 3-ball Snyder column with 24/40 Standard Taper joints (2158-3CO), a 250mL flask with a 24/40 outer Standard Taper upper joint and 19/22 inner Standard Taper lower joint, and a 1 ...
PYREX® 500mL Soxhlet Extractor with Standard Taper Joints, Body Only (Product #3740-XL)
These 500mL PYREX® Soxhlet extractors have a bulb in siphon tube near the top of tube to facilitate cycling of the siphoning action. PYREX® extraction thimbles, paper filters or glass wool are used to support the sample. The siphon tube is protected from a ...
PYREX® 1L Extractor Body for the Modular Continuous Heavier than Water Liquid/Liquid Extractor System (Product #3922-MBO)
This 1L PYREX® extractor body has a 45/50 Standard Taper outer top joint, a middle 35/25 Spherical Joint ball joint and a bottom 18/9 Spherical Joint socket joint. It is a component of the modular Continuous Heavier than Water Liquid/Liquid Extractor (Nos. ...
These 25mm diameter PYREX® coarse porosity (40 to 60µm) fritted thimbles are designed for use in PYREX® Soxhlet extractors when it is desirable to weigh the material extracted or where paper thimbles may be attacked by the chemicals used. These short lengt ...
PYREX® 200mL Soxhlet Extractor with Standard Taper Joints, Body Only (Product #3740-L)
These 200mL PYREX® Soxhlet extractors have a bulb in siphon tube near the top of tube to facilitate cycling of the siphoning action. PYREX® extraction thimbles, paper filters or glass wool are used to support the sample. The siphon tube is protected from a ...
PYREX® 35mm Diameter Extra Coarse Porosity Fritted Thimble, 90mm Long (Product #33950-MEC)
These 35mm diameter PYREX® extra coarse porosity (170 to 220µm) fritted thimbles are designed for use in PYREX® Soxhlet extractors when it is desirable to weigh the material extracted or where paper thimbles may be attacked by the chemicals used. These med ...
These 35mm diameter PYREX® coarse porosity (40 to 60µm) fritted thimbles are designed for use in PYREX® Soxhlet extractors when it is desirable to weigh the material extracted or where paper thimbles may be attacked by the chemicals used. These medium leng ...
PYREX® 45mm Diameter Extra Coarse Porosity Fritted Thimble, 130mm Long (Product #33950-LEC)
These 45mm diameter PYREX® extra coarse porosity (170 to 220µm) fritted thimbles are designed for use in PYREX® Soxhlet extractors when it is desirable to weigh the material extracted or where paper thimbles may be attacked by the chemicals used. These med ...
