PYREX® 500mL Extractor System with Soxhlet Extractor and Allihn Condenser (Product #3840-L)
This 500mL PYREX® extractor system consists of a Soxhlet extractor with 24/40 inner Standard Taper joint on the bottom and a 55/50 outer Standard Taper joint on the top, an Allihn condenser with a 55/50 inner Standard Taper joint on the bottom and a flask ...
PYREX® 250mL Extractor System with Soxhlet Extractor and Allihn Condenser (Product #3840-M)
This 250mL PYREX® extractor system consists of a Soxhlet extractor with 24/40 inner Standard Taper joint on the bottom and a 45/50 outer Standard Taper joint on the top, an Allihn condenser with a 45/50 inner Standard Taper joint on the bottom and a flask ...
PYREX® 125mL Extractor System with Soxhlet Extractor and Allihn Condenser (Product #3840-S)
This 125mL PYREX® extractor system consists of a Soxhlet extractor with 24/40 inner Standard Taper joint on the bottom and a 34/45 outer Standard Taper joint on the top, an Allihn condenser with a 34/45 inner Standard Taper joint on the bottom and a flask ...
PYREX® 1L Extractor System with Soxhlet Extractor and Allihn Condenser (Product #3840-XL)
This 1L PYREX® extractor system consists of a Soxhlet extractor with a 29/42 inner Standard Taper joint on the bottom and a 71/60 outer Standard Taper joint on the top, an Allihn condenser with a 71/60 inner Standard Taper joint on the bottom and a flask w ...
PYREX® 250mL Extractor System with Soxhlet Extractor and Friedrichs Condenser (Product #3880-M)
This is an efficient 250mL PYREX® extraction apparatus for general purpose use. Consists of a Soxhlet extractor with a 24/40 inner Standard Taper joint on the bottom and a 45/50 outer Standard Taper joint on the top, a special Friedrichs condenser with a 4 ...
PYREX® 125mL Arsine Generator System (Product #3900)
This PYREX® arsine generator is designed for arsenic determination by the silver diethyldithiocarbamate photometric method. It meets A.P.H.A. Standard 104A, ACS/USP and EPA specifications. The 125mL flask has a 24/40 inner Standard Taper joint and ball and ...
PYREX® Accelerated One-Step™ Extractor-Concentrator System (Product #3915-C)
This revolutionary modular PYREX® Accelerated One-Step™ extractor/concentrator performs extraction, concentration, and drying with the same apparatus and is designed for use with solvents of heavier specific gravity than sample being extracted. The require ...
PYREX® 1L One Piece Continuous Heavier than Water Liquid/Liquid Extractor System (Product #3920-M)
This 1L PYREX® single piece continuous liquid/liquid extractor is for use with solvents of heavier specific gravity than sample liquid being extracted. It is designed to meet EPA test method requirements outlined by SW-846, RCRA, and CLP. The sidearm is se ...
PYREX® Replacement Extractor Body for the One Piece Continuous Heavier than Water Liquid/Liquid Extractor System (Product #3920-MBO)
This PYREX® extractor body with a 45/50 Standard Taper outer top joint and a 24/40 Standard Taper inner bottom joint is a replacement for the One Piece Continuous Heavier than Water Liquid/Liquid Extractor System.
PYREX® 1L Extractor Body for the Modular Continuous Heavier than Water Liquid/Liquid Extractor System (Product #3922-MBO)
This 1L PYREX® extractor body has a 45/50 Standard Taper outer top joint, a middle 35/25 Spherical Joint ball joint and a bottom 18/9 Spherical Joint socket joint. It is a component of the modular Continuous Heavier than Water Liquid/Liquid Extractor (Nos. ...
